+Ethernet eth0: MAC address 00:14:bf:70:dc:9b IP: 192.168.0.1/255.255.255.0, Gateway: 192.168.0.1 Default server: 0.0.0.0, DNS server IP: 0.0.0.0 RedBoot(tm) bootstrap and debug environment [ROMRAM] Red Hat certified release, version 1.92 - built 15:16:07, Feb 3 2004 Platform: IXDP425 Development Platform (XScale) Copyright (C) 2000, 2001, 2002, Red Hat, Inc. RAM: 0x00000000-0x02000000, 0x000723a0-0x01ff3000 available FLASH: 0x50000000 - 0x50800000, 64 blocks of 0x00020000 bytes each. == Executing boot script in 2.000 seconds - enter ^C to abort RedBoot> boot;exec 0x01d00000 have eRcOmM copy kernel code from flash to RAM copy ramdisk file from flash to RAM run kernel Using base address 0x01d00000 and length 0x0000b834 Ans APEX Boot Loader 1.5.8 -- Copyright (c) 2004,2005,2006,2007 Marc Singer compiled for OpenWRT NSLU2 (bigendian) APEX comes with ABSOLUTELY NO WARRANTY. It is free software and you are welcome to redistribute it under certain circumstances. For details, refer to the file COPYING in the program source. apex => mem:0x00200000+0xb834 (47156 bytes) env => nor:0x7f8000+16k (empty) Use the command 'help help' to get started. # copy $kernelsrc $bootaddr # copy fis://kernel 0x00008000 1048544 bytes transferred # wait 10 Type ^C key to cancel autoboot. Type ^C key to cancel autoboot. # boot ATAG_HEADER ATAG_MEM: start 0x00000000 size 0x02000000 ATAG_CMDLINE: (94 bytes) 'root=/dev/mtdblock4 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd' ATAG_END Booting kernel at 0x00008000... Uncompressing Linux................................................................. done, booting the kernel. Linux version 2.6.21.6 (slug@otto) (gcc version 4.1.2) #1 Fri Dec 28 11:04:49 UTC 2007 CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE), cr=000039ff Machine: Linksys NSLU2 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists. Total pages: 8128 Kernel command line: rtc-x1205.probe=0,0x6f root=/dev/mtdblock4 rootfstype=squashfs,jffs2 console=ttyS0,115200 init=/etc/preinit noinitrd PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory: 32MB = 32MB total Memory: 30396KB available (1804K code, 169K data, 76K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 IXP4xx: Using 16MiB expansion bus window size PCI: IXP4xx is host PCI: IXP4xx Using direct access for memory space PCI: bus0: Fast back to back transfers disabled dmabounce: registered device 0000:00:01.0 on pci bus dmabounce: registered device 0000:00:01.1 on pci bus dmabounce: registered device 0000:00:01.2 on pci bus NET: Registered protocol family 2 Time: OSTS clocksource has been installed. IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes) TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered NetWinder Floating Point Emulator V0.97 (double precision) squashfs: version 3.0 (2006/03/15) Phillip Lougher Registering mini_fo version $Id$ JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. io scheduler noop registered io scheduler deadline registered (default) IXP4xx Watchdog Timer: heartbeat 60 sec Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250.0: ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale serial8250.0: ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale IXP4XX Q Manager 0.2.1 initialized. IXP4XX NPE driver Version 0.3.0 initialized ixp_crypto: No HW crypto available IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Intel/Sharp Extended Query Table at 0x0031 Using buffer write method cfi_cmdset_0001: Erase suspend on write enabled Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x7e0000 6 RedBoot partitions found on MTD device IXP4XX-Flash.0 Creating 6 MTD partitions on "IXP4XX-Flash.0": 0x00000000-0x00040000 : "RedBoot" nslu2 mac: 00:14:bf:70:dc:9b 0x00040000-0x00060000 : "SysConf" 0x00060000-0x00080000 : "Loader" 0x00080000-0x00180000 : "Kernel" 0x00180000-0x007e0000 : "rootfs" 0x00280000-0x007e0000 : "rootfs_data" 0x007e0000-0x00800000 : "FIS directory" npe: searching for firmware... npe: found at 0x1c010, IXP425/NPE-B func: 00, rev: 2.1, size: 11964, id: 01000201 Image loaded to NPE-B Func:0, Rel: 2:1, Status: 80c00000 i2c /dev entries driver x1205 0-006f: chip found, driver version 1.0.7 x1205 0-006f: rtc core: registered x1205 as rtc0 Registered led device: ready Registered led device: status Registered led device: disk-1 Registered led device: disk-2 nf_conntrack version 0.5.0 (256 buckets, 2048 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP westwood registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear All bugs added by David S. Miller XScale DSP coprocessor detected. ixp4xx_mac driver 0.3.1: eth0 on NPE-B with PHY[1] initialized x1205 0-006f: setting the system clock to 2008-02-09 19:25:31 (1202585131) VFS: Mounted root (squashfs filesystem) readonly. Freeing init memory: 76K Warning: unable to open an initial console. - preinit - switching to jffs2 mini_fo: using base directory: / mini_fo: using storage directory: /jffs - init - init started: BusyBox v1.4.2 (2007-12-28 10:50:24 UTC) multi-call binary Please press Enter to activate this console. eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PPP generic driver version 2.4.2 PCI: enabling device 0000:00:01.0 (0140 -> 0142) ohci_hcd 0000:00:01.0: OHCI Host Controller ohci_hcd 0000:00:01.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:01.0: irq 28, io mem 0x48000000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected PCI: enabling device 0000:00:01.1 (0140 -> 0142) ohci_hcd 0000:00:01.1: OHCI Host Controller ohci_hcd 0000:00:01.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:01.1: irq 27, io mem 0x48001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: enabling device 0000:00:01.2 (0140 -> 0142) ehci_hcd 0000:00:01.2: EHCI Host Controller ehci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:01.2: irq 26, io mem 0x48002000 ehci_hcd 0000:00:01.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 5 ports detected SCSI subsystem initialized Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. BusyBox v1.4.2 (2007-12-28 10:50:24 UTC) Built-in shell (ash) Enter 'help' for a list of built-in commands. _______ ________ __ | |.-----.-----.-----.| | | |.----.| |_ | - || _ | -__| || | | || _|| _| |_______|| __|_____|__|__||________||__| |____| |__| W I R E L E S S F R E E D O M KAMIKAZE (7.09) ----------------------------------- * 10 oz Vodka Shake well with ice and strain * 10 oz Triple sec mixture into 10 shot glasses. * 10 oz lime juice Salute! --------------------------------------------------- root@OpenWrt:/#